0 Usuarios y 1 Visitante están viendo este tema.
I found out Zishan has released a new firmware for Z1 player. It supports three new playback modes.You can download a zip file from my dropbox:https://www.dropbox.com/s/4abdwkt86kbtjld/Zishan Z1.zip?dl=0The update is simple. All you need is the ZiShan_Z1_0.2.zip and a TF card. I used a 32GB TF card in FAT32 format.1) Turn off Z1 player;2) Extract app.bin from ZiShan_Z1_0.2.zip, and put it in the root directory of the TF card;3) Insert the TF card into the player;4) Turn on the Z1 player. The LED light will be on for 3 seconds and then blink ultra-fast for around 5 seconds. (Done).5) Remove the file app.bin in the card.What's new in v0.2:1) Add 180 EQ settings. (WTF...it's a screen-less player.)2) Add 3 playback modes: Repeat, Shuffle and Default. (Very useful for me.)3) Fix a DSD problem.How to choose playback modes:Press 'Prev' for a few seconds until the LED light blinks faster than normal, then release. And:a) Press 'Prev' to choose Repeat track mode.b) Press 'Stop' to choose Shuffle all tracks mode.c) Press 'Next' to choose Default play mode. It plays in alphabetical order, I think.How to set EQs:Press 'Stop' for a few seconds until the LED light blinks faster than normal, then release. And you are in EQ settings mode:a) Press 'Prev' to choose previous EQ.b) Press 'Next' to choose next EQ.c) Press 'Stop' to choose current EQ.d) Press 'Prev' for a few seconds to disable EQ.Total 180 EQs.How to reset the player:1) Turn off the player;2) Press 'Prev' and hold, turn on the player. If the LED light blinks fast, it means the player is reset to factory status.3) Turn off and on the player again.*** Opamps to use in Zishan Z1 ***01.) Dual opamp, made from 2x ADA4627-1BRZ mono opamps02.) Dual opamp, made from 2x AD825AR V3 mono opamps03.) Dual opamp, OPA2604AP04.) Dual opamp, OPA2134PA 05.) Dual opamp, LME49720HA (TO-99 round metal case)06.) Dual opamp, LME49720NA07.) Dual opamp, PHILIPS NE5532N (Vintage - mid-90s)08.) Dual opamp, TI NE5532P (stock in Z1 & v2)09.) Dual opamp, LF353N (purchased in the mid-80s)***
Ya me ha llegado el repro y bastante rápido. ......¿Cómo suena? Ayyyy, pues estoy en ello, pero como cada vez estoy peor de lo mío...qué os voy a contar!!!Saludos.
Y luego sobre el zócalo soldado a la placa y ya está. Solo hay que tener la precaución de insertar cada patita en el zócalo en su posición correspondiente. Seguro que previamente habrá que cortarlas un poco y luego darles un poco de forma para facilitar su inserción en el zócalo de 8 patas.